18
1 x
Left Rail 2 x 4 x 62-7/8”
1 x
Right Rail 2 x 4 x 62-7/8”
4 x
Ladder Tread 5/4 x 4 x 13-7/8”
2254
2251
2250
Fig. 2.1
Wood Parts
Hardware
Step 2: Access Ladder / Rockwall Assembly
Part 1
A:
Place (2250) Left Rail on left hand side of 4 (2254) Ladder Treads and (2251) Right Rail on right hand side
with the grooves facing in. (fig. 2.1)
B:
Fit each (2254) Ladder Tread into grooves on both (2250) and (2251) Rails, make sure the top edge of the
treads are flush to the front of the rails. (fig. 2.1 and 2.2)
C:
Attach Rails and Ladder Treads together using 4 (S15) #8 x 1-3/4” Wood Screws per tread. (fig. 2.1)
Other Parts
2 x Swing Bracket
16 x
#8 x 1-3/4” Wood Screw
2 x
5/16 x 1-1/2” Hex Bolt
(5/16” lock washer, 5/16” flat washer, 5/16” t-nut)
G1
Fig. 2.2
Fig. 2.3
2250
2251
2254
2254
Swing
Bracket
End View
5/16” Flat
Washer
5/16” T-Nut
Flush to
edges
2250
D:
Attach Swing Brackets to the inside top of (2250)
and (2251) Rails at angled edge using 1 (G1) 5/16
x 1-1/2” Hex Bolt (with lock washer, flat washer and
t-nut) per bracket. Edge of Swing Bracket is flush with
edge of rails. (fig. 2.1 and 2.3)
Left Side
Right Side
Top of Ladder View
S15
S15
5/16” Lock
Washer
S15
G1
