11.
PROGRAMMABLE PAR TIME SELECTION:
(Continued….)
The example above shows that three Par strings were programmed to function consecutively, each
with a different Par time and a different delay between each Par setting. The timer will begin after the
preset delay, with the first Par time of 3.0 seconds, followed by a 2 second delay. Each new Par time
string will begin with the buzzer and clock counting from ZERO and the buzzer resounding at the end
of selected Par time, followed by the given delay (if any is set) and then the starting of the next Par
string and so on until the last Par time string programmed has been completed. The user MUST select
both a Par & Delay time before pressing the ENTER to store the data.
No Delay time should be set
for the last Par time selected.
PLEASE NOTE:
A programmed function may be stopped (interrupted) at any time during the running
of the program by pressing the REVIEW button. The timer then proceeds to the next string. If the
user wishes to repeat the first string again, press CLEAR button twice, which returns the timer to the
first string Par / delay. If the user then wants to move forward to the next string, without running the
first string, press the START button, followed by the REVIEW button BEFORE the countdown delay
reaches zero (this will not work in INSTANT delay). This will progress the timer forward through the
automatic Par sequences one by one.
MULTI- PAR TIME SELECTION:
This innovative feature gives the user a string of up to five possible Par beeps based on one timer
activation only. The user can set Par times to the hundredth of a second for precise practice use. This
function is excellent for dry fire practice, draws, reloads, and transitional movement.
For use, select PAR and then scroll down and select “MULTI-PAR”, highlight it, and press ENTER to
confirm it. The user will see Multi-Par 1 with 00.00 to the right if it. Press the “right” key to highlight
the desired column and then scroll up or down to select a value from 0 to 9 and then press “right” key
to highlight the next column and select a value for it and so on until all four value columns are set.
Press ENTER to confirm the setting and advance to the next Multi-Par setting to be selected. The
timer allows up to five Par times to be selected and entered in Multi-Par. Once ALL of the desired Par
times have been selected and entered, then confirm the times set by pressing ENTER again. Due to
the duration of the START and PAR beeps, the first Par (in Multi-Par) can not be set for less than 0.60
sec., with each subsequent Par being not less than 0.40 seconds.
Example: Minimum allowed setting due to beep duration
P1= 01.00
00.60
P2= 01.25
00.40
P3= 01.20
00.40
