cectek Kingcobra Manual Download Page 95

Page: 95 / 125

Replace genuine CECTEK parts by the poor quality parts can damage your vehicle.

Poor-made part could cause your vehicle to wear quickly and shorten useful life.

Only use genuine CECTEK replacement parts or equivalent designed for use on this

vehicle.

Warning

Driving under severe condition will causes more wear on this vehicle. Server conditions

include driving under frequent full throttle, or in dusty, wet sandy or muddy areas. These

conditions will cause the vehicle to wear more quickly.

If you drive this vehicle under above condition, maintain your vehicle more often than

the schedule in the chart. Contact CECTEK dealer if you have any questions regarding

maintenance.

Warning

Improper maintenance or failure to perform recommended maintenance can be

hazardous.

Improper maintenance or failure to perform recommended maintenance could result of

anaccident.

Keep this vehicle in good condition. If you are not familiar with safe maintain practices

and adjust procedures, ask your CECTEK dealer to do.

Warning

Toolkit
Strip

Always carry the owner’s manual and tool kit with this vehicle. The owner’s manual has the

necessary information to provide you maintenance and minor repairs. The tools provided for

the basis maintenance in this owner’s manual. It is located under the seat.

TOOLKIT

1
2

Summary of Contents for Kingcobra






























































































































Search results

Summary of Contents for Kingcobra

Reviews:

Related manuals for Kingcobra

Brands by name

Popular brands

cectek Kingcobra, Manual

Search results

Summary of Contents for Kingcobra

Reviews:

Related manuals for Kingcobra

Brands by name

Popular brands