manualshive.com logo in svg

cectek Kingcobra, Manual

Share
Download
cectek Kingcobra Manual Download Page 117

113

TRAILER TOWING

Using this vehicle to tow a light trailer with an optional trailer hitch.  You should observe the 

requirements and recommendation as below.

1. Towing a trailer during the break-in period can damage your vehicle. Never tow a trail during 

the first 10 hours when you ride this vehicle.

2. Ensure to install the proper ball size that match the equipment you will tow.

3. Never use a trailer hitch bracket that provides a trailer coupler location lower than the center 

oftherearwheels.

4. Trailer towing will add the engine, drive train, and brakes. Safely reduce speed according to 

terrainconditionswhentowingatrailer.

CAUTION

Towing  a  trailer  during  the  break-in 

periodcandamagethisvehicle.

Trailertowingmaketheengine,drive

train  and  brakes  work  under  more 

stress.

Never  tow  a  trailer  during  break-in 

period.

VEHICLE/TRAILERLOAD

You must measure the Gross Trailer Weight and Trailer Tongue Weight before towing the trailer.

GROSS TRAILER WEIGHT is the weight of the trailer plus cargo in it. Measure the weight by 

putting each wheel of the fully loaded trailer on a scale. 

TONGUE WEIGHT is the downward force applied on the hitch by the trailer coupling when the 

trailer is fully loaded up to the limit of gross weight. You can measure this weight by using a 

bathroom scale on the coupler.

The GROSS TRAILER WEIGHT should not over 170 kg (375 lbs). 

You may tow up to the vehicle towing limit of 450 kg, when you are towing at very low speed 

along the straight level path, and on private ground not public road.

The TONGUE WEIGHT should not be over 10% of the GROSS TRAILER WEIGHT.

Summary of Contents for Kingcobra






























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands