cectek Gladiator, Service Manual

Page: 57 / 151

THE LAY SHAFT ASSEMBLY
46030030 HNEEDLE BEARING (CAGE TYPE) 8.
46030010 WASHER 7.
46030005 HIGH SPEED DRIVEN GEAR (36T) 6.
RCS030 RETAIN C-RING 5.
46030007 LOW SPEED DRIVEN GEAR (45T) 4.
46030031 NEEDLE BEARING (HALF CAGE TYPE) 3.
CRBNU1007NR CYLINDRICAL ROLLER BEARING 2.
46030002 LAY SHFAT 1.
PART NO. PART NAME NO.
RCS025 RETAIN C-RING 10.
46030008 REVERSE DRIVEN GEAR (34T) 9.
Before install gear and bearing , please lubricate with 10W/40 oil
1.Install bearing (2) into lay shaft (1) , be shall install bearing of long
side into bevel gear side
2.Install needle bearing (3) into lay shaft , then install low gear (4) into
lay shaft , be shall install low gear (4) of plane into bevel gear side
3.Install retain C-ring (5) into lay shaft of groove
4.Install high gear (6) into lay shaft , be shall install high gear (6) of
fork groove side into another bevel gear side
46030029 BEARING (DOUBLE ROW ANGULAR) 12.
46030016-26 ADJUSTING WASHER 11.
SCF060200883 FLAT HEAD SCREW 14.
46030012 WASHER 13.
50