cectek Gladiator, Service Manual

Page: 59 / 151

THE REAR DRIVESHAFT ASSEMBLY
Before install gear and bearing , please lubricate with 10W/40 oil
1.Press the bearing (2) into the shaft (1) thoroughly.
2.Install the gear (3) into shaft (1).
3.Tighten the bolt(5) with washer (4) on the shaft (1) , the tighten
torque 20Nm
4.Install the washer (6) which thickness shall be measured in advance
into shaft (1) , then press the bearing (7) into shaft (1) , finally intsall
the O ring (8)
46050025 O-RING 8.
DGB6305 BEARING 7.
46050009-19 WASHER 6.
BFH080251094 BOLT 5.
46050007 WASHER 4.
46050023 GEAR 3.
DGB6205 BEARING 2.
46058001 DRIVE SHAFT ASSY. 1.
PART NO. PART NAME NO.
5 2