ENGLISH
The device does not turn
on.
The device is not turned on.
Plug the device in and switch
it on again.
The dynamo is damaged.
Contact Cecotec’s customer
service.
The device is placed on an
unstable surface.
Place the device on a stable
surface.
Loose or foreign particles
inside the device.
Contact Cecotec’s customer
service.
The motor is loose.
Contact Cecotec’s customer
service.
The plastic packaging of each
filter has not been removed.
Before using the device,
remove the plastic pack
The device’s performance
is lower than usual
The washable mesh filter is
dirty.
Clean the device’s mesh filter.
The filter has not been
replaced.
Replace a set of new filters.
The device’s air inlet or outlet
is blocked.
Contact Cecotec’s customer
service.
The plastic packaging of each
filter has not been removed.
Before using the device,
remove the plastic packaging
of each filter.
The gap between the device
and other objects is not the
adequate one.
Make sure the distance
between the device and
other objects is 50 cm from
both sides of the air inlet and
outlet, and 10 cm from the
back of the device.
The device’s filter is missing.
Make sure all the filters are
installed correctly.
The device exceeds the
adequate covering area.
Make sure the device
operates on an adequate
covering area.
If your problem persists, please contact Cecotec’s customer service.
05620_05621_05622_TotalPure 2500_5000_7500_ Connected_Manual_YV_01200320.indd 37
05620_05621_05622_TotalPure 2500_5000_7500_ Connected_Manual_YV_01200320.indd 37
20/3/20 15:18
20/3/20 15:18
TOTALPURE 2500 / 5000 / 7500 CONNECTED
36
