32
|
CONGA 8090 ULTRA
ENGELSK
- This mode can be activated during any other cleaning cycle and the robot
will stop cleaning and return to the charging automatically.
- The robot will take the shortest route back to the charging base thanks to
its map memorizing and the smart back home function.
- When a cleaning cycle has been completed or the robot’s battery is low,
thanks to its Total Surface 3.0 technology, the robot will also return to the
charging base to avoid running out of battery. Once the robot has recharged,
it will resume cleaning from the point it has stopped.
Recommendation
Remove the Wet & dry tank during charging.
Remote control.Fig. 13.
- Scheduling
- Power levels (Turbo/Normal/Eco)
- Back home
- Clock
- Manual control
- On/Pause
- Edge mode
Remote control binding
- If the robot does not respond to the remote control, follow the below
steps:
- Press the Edge mode button on the remote control for 5 seconds for the
remote control to enter pairing mode. The screen will display 8888.
- The remote receiver will be activated in 5 seconds and will enter pairing
mode. The remote control’s signal is received and the remote control returns
to normal status. The display will show pairing is completed.
- If the pairing process is unsuccessful, the remote control will display 8888
and will exit the pairing mode after 30 seconds.
The following modes and operations can be activated from the remote
control.
Modes
The first time the robot is operated, it will map and save the whole house’s
map by means of its laser before starting the cleaning cycle. Use the robot
in Auto mode and Eco power level, this way you will ensure the robot
memorises the full map.
Note
Make sure the light indicator is lit up in blue before starting cleaning,
indicating it is activated.