CONGA 8090 ULTRA
|
29
ENGLESK
Dust tank
Fig. 4.
1. Tank lock
2. Fixing
Charging base
Fig. 5.
1. Signal transmission area
2. Charging terminal
3. Charger input
2. Before use
- Take the product out of the box and remove all packaging materials.
- Make sure all parts and components are included and in good conditions.
If any sign of visible damage is observed, contact immediately with the
official Technical Support Service of Cecotec.
3. Installation
Robot and charging base installation. Fig. 6, 7.
- Connect the charging base to a power supply and store the remaining
cable. It is important to store the remaining cable at the bottom of the
charging base to avoid it from being dragged and disconnected.
- Place the charging base against the wall, leaving the safety distance
indicated in the below picture.
Note
Ensure a space of at least 1 m on both the left and right side of the charging
base, and a space of at least 2 m in front of it.
Warning
Do not expose the charging base to direct sunlight.
Hold down the power button for 3 seconds; when the light indicator turns
on, place the robot on the charging base. Fig. 8.
- Steady white light: On/Operating and/or charged.
- Oscillating orange light: charging and/or back home mode.
- Oscillating red light: Error
- Steady red light: tank or mop missing