36
|
CONGA 1090
ENGELSK
Clean the main brush
Slightly press the main brush frame’s tabs in order to open the main brush
storage gap and to remove it.
Fig. 43
Remove any hair, fluffs or dust collected in the brush and around the axes.
Fig. 44
Clear and clean the robot’s suction channel.
Fig. 45
Reinstall the main brush and its frame.
Fig. 46
High-efficiency filter:
The high-efficiency filter is designed with fibres that help trapping dust
particles, dust mites, pollen... It is very important to clean periodically the
filter, to avoid these particles from building up in the filter, causing efficien
-
cy loss. It is convenient to carry out this maintenance once a week.
It is suggested to replace the filter by a new one after a maximum of 160
hours of use.
Recommendations: Dirt can be removed with a small brush or by shaking it
carefully against a hard surface for dust to fall off. The high-efficiency filter
cannot be washed.
Mesh primary filter and sponge filter
The filtering system is featured with a mesh primary filter and a sponge
filter. It is suggested to replace them either after a maximum of 160 hours
of use or when they are worn out due to operation.
Recommendations: Dirt can be removed with a small brush or by shaking it
carefully against a hard surface for dust to fall off. You can also use warm
water without detergents to obtain better results. Always make sure they
are completely dry before installing them again.
Side brushes
Side brushes are designed with multiple bristles and are used to push dirt
towards the suction nozzle and to clean thoroughly edges and corners.
These brushes can wear out over time, affecting negatively to the cleaning
efficiency. For this reason, it is suggested to replace each side brush after
a maximum of 220 hours.
Recommendations: It is recommended to clean the side brushes once a
week with the help of the cleaning brush.
Main brush
The main brush is designed with bristles and silicone, spins at top speed
Summary of Contents for CONGA 1090
