DRESSCODE 7200 / 8200 / 9200 / 10200 INVERTER
DRESSCODE 7200 / 8200 / 9200 / 10200 INVERTER STEEL
61
ENGLISH
Loosen the clamp nut and four bolts.
Tighten the clamp nut.
Press slide bushing and insert inlet hose into connecting base.
Connection finished.
Connection between screw tap and inlet hose. Fig. 9.
Tap with threads and inlet hose.
Special tap for washing machine.
Connect the other end of inlet hose to the inlet valve at the backside of product and fasten
the pipe tightly clockwise. Fig. 10.
Drain hose
Note: Do not kink or protract the drain hose.
Position the drain hose properly, at 60-90 cm from the floor.
There are two ways to place the end of the drain hose:
In a drainpipe. It is recommended to use a vertical tube.
In a sink’s drainpipe, over the trap.
Fig. 11. (Hacer de nuevo drawing para que la manera 1 sea similar a fig. 11.1)
If the machine has drain hose support, it can also be installed on a sink or a tank, like the
following. Fig. 12.
Warning: When installing drain hose, fix it properly with a rope. If drain hose is too long, do
not force it into washing machine as it will cause abnormal noises.
4. OPERATION
Note:
Please make sure the appliance is properly installed before operating it.
Run one whole cycle while the appliance is empty before using it for the first time.
Calibration
It is recommended to calibrate the appliance. To do so:
Empty the washing machine.
Plug it in.
Turn the appliance on and press Speed and Delay at the same time within 10 seconds. The
display will show “t19”.
Press the Start/Pause button for the appliance to start washing. The display will show “****”.
IM 02317 02322 02327 02332 02319 02324 02328 02333 Lavadora Bolero DressCode_IC_YV_02210311.indd 61
IM 02317 02322 02327 02332 02319 02324 02328 02333 Lavadora Bolero DressCode_IC_YV_02210311.indd 61
11/3/21 17:24
11/3/21 17:24
