Cecilware FE-100G Operation Manual Download Page 1

                                                   

 

              AUTOMATIC GAS 

            

 

 

 

                              

COFFEE URN 

OPERATION MANUAL

 

 

MODEL:

           

 

 

 

FE-100G 
 

 
 
 
 

SPECIFICATIONS 
INSTALLATION 
MAINTENANCE TIPS 
REPAIR PARTS LIST 
WIRING DIAGRAMS 

 
 
 
 
 
 
 

GAS SPECIFICATIONS 

MODEL NO. 

NATURAL GAS  

BTU/HR @ 3.5” W.C. 

PROPANE GAS 

BTU/HR @ 10” W.C. 

          FE-100G 

32,000 

32,000 

 

 

FOR YOUR SAFETY  

DO NOT STORE OR USE GASOLINE OR OTHER FLAMMABLE VAPORS AND 

LIQUIDS IN THE VICINITY OF THIS OR ANY OTHER APPLIANCE. 

 

THIS INSTALLATION MUST CONFORM WITH THE NATIONAL FUEL GAS CODE

ANSI Z223.1 (LATEST EDITION). 

 

WARNING: IMPROPER INSTALLATION, ADJUSTMENT, ALTERATION, SERVICE 

OR MAINTENANCE CAN CAUSE PROPERTY DAMAGE, INJURY OR DEATH. READ 

THE INSTALLATION, OPERATING AND MAINTENANCE INSTRUCTIONS 

THOROUGHLY BEFORE INSTALLING OR SERVICING THIS EQUIPMENT. 

 

CECILWARE CORPORATION 

43-05 20

TH

 AVENUE, LONG ISLAND CITY, NY 11105-1295 

 718 

932-1414 

 

                                                           

                                  N529A  08/99 DS 

Summary of Contents for FE-100G












Reviews: