cec TL2N, Owner'S Manual

Page: 25 / 28

TL2N User's Manual
25
Troubleshooting
If you suspect a malfunction in this appliance, please check the following chart before calling
your dealer.
malfunction possible cause solution
no power
AC power cord loosen
connect completely both ends of AC
power cord
no playback
no stabilizer on CD place CD-Stabilizer on CD
CD door open close CD door completely
CD bottom side up place CD label facing up
CD bottom side soiled clean up CD
sound skipping
suffering vibrations
change the location or place on a
stable rack
CD bottom side soiled clean up CD
no sound
wrong connections correct connections as per manual
wrong input on D/A converter select an input with connection
wrong operation on D/A converter or
amplifi er
check connections, input selection
and volume setting
failure by interferences turn off and on all the devices
sound distortion
wrong cables change to suitable cables
wrong cable direction correct the direction
hum noise RCA plugs loosen connect the plugs completely
interference on tuner very close to tuner place away from tuner or power off
unresponsive to remote
control
no power on TL2N turn on TL2N
no batteries in RC unit install batteries
no enough power on batteries replace with new batteries
TL2N contains a microcomputer that can malfunction due to the external noise or
interference. If this seems to be the case, turn the unit off and wait for a short while before
turning it back on and trying again