cec AMP3800 Owner'S Manual Download Page 3

AMP3800 User's Manual

Important Safety Instructios

1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use the unit near water.
6) Clean only with a dry cloth.
7)  Do  not  block  any  ventilation  openings.  Install  in  accordance  with  the 
manufacturer’s instructions.

8) Do not install the unit near any heat sources such as radiators, heat registers, 
stoves, or other apparatus (including amplifiers) that produce heat.
9) (For USA, Canada: ) Do not defeat the safety purpose of the polarized or 
grounding-type plug. A polarized plug has two blades, with one blade wider than 

another. A grounding type plug has two blades and a third grounding prong. The 
wide blade or the third prong is provided for your safety. If the provided plug does 

not fit your outlet, consult an electrician for replacement of the obsolete outlet. 
(For European Countries: ) Do not defeat the safety purpose of the grounding-type 

plug. This plug has two poles and a third grounding hole. The third hole is provided 

for your safety. If the provided plug does not fit your outlet, consult an electrician 

for replacement of the obsolete outlet.

 

 

 

Caution: To reduce the risk of electric shock, 

do not remove the cover or rear panel. It does 

not contain any user-serviceable parts. Refer 

servicing to qualified service personnel.

The  lighting  flash  with  arrowhead  symbol, 

within an equilateral triangle, is intended to 

alert the use to potential shock hazards within 

the product’s enclosure.

The exclamation point within an equilateral 

triangle,  is  intended  to  notify  the  user  to 

the  presence  of  important  operating  and 

maintenance  (servicing)  instructions  in  the 

accompanying documentation.

WARINIG: TO PREVENT FIRE OR SHOCK HAZARD, DO 

NOT EXPOSE THE APPLIANCE TO RAIN OR MOISUTRE.

Summary of Contents for AMP3800


















Reviews: