cec AMP3800, Owner'S Manual, Page: 12 / 17

Control / Power Amplifier AMP3800
1
Remote Control Unit
❶
❷
❸
❹
❺
❶
MUTE button
Press the MUTE button to mute AMP3800. The display will indicate
“MUTE”. To cancel MUTE mode, press the MUTE button again.
❷
VOL.+ button
Press the VOL.+ button to increase the volume level. Press and
hold the VOL.+ button to increase the volume level continuously.
Note: Beware of high volume settings.
❸
VOL.- button
Press the VOL.- button to decrease the volume level. Press and
hold the VOL.- button to decrease the volume level continuously.
❹
RCA1/RCA2/RCA3/RCA4 input button
Press the RAC1 / RCA2 / RCA3 / RCA4 button to select an
unbalanced INPUT source. The display will indicate the selected
INPUT.
❺
XLR input button
Press the XLR button to select the balanced INPUT source. The
XLR indicator will be displayed.
NOTE: During receiving a valid remote control command, the
REMOTE CONTROL INDICATOR on the front panel blinks with a
blue color.
NOTE: The other buttons on the remote control unit work for CEC
CD3800 but not for AMP3800.
Precautions on Using the Remote Control Unit
● Avoid exposing the remote control sensor on AMP3800’s front panel to direct
sunlight or other light sources, as such exposure can cause malfunction.
● When operating the remote control, point it towards the remote control
sensor.
● Make sure nothing is blocking AMP3800’s front panel, where the remote
control sensor is located.
● Battery drain may cause the remote control unit to malfunction. Change the
batteries to new ones of the same type (AAA) if this happens.
●
The remote control unit should be handled with care. Dropping it on can result
in damage.
● This manual only explains how to use the remote control unit with AMP3800,
but this unit can be used CD3800.