68/107
4�2�1 SPOT mode
The procedure may be used for fastening or for steel and CrNi alloy panel joint welding up to a thickness of approximately
2.5 mm. It is also possible to weld panels of different thickness placed on top of one another.
In
SPOT
mode, spot welding work can be carried out in
combination with the 2 stroke and 4 stroke start modes described
previously.
To activate the mode, select the
SPOT
pushbutton.
To select the
SPOT
mode parameters, follow the pathway:
Menu -> Process Parameters -> Spot
Setting
SPOT:
Spot
ON
SPOT
mode activated
OFF
SPOT
mode deactivated
Spot time
Welding spot duration
0.01-25 s
Pause
time
Duration of pause between two
consecutive spots.
(Intermittent function)
OFF–5 s
4�3 Arc striking modes
Weld arc ignition mode is chosen by selecting pushbutton
O – Fig�4
.
HF
high-frequency ignition.
Lift
contact ignition.
Evo Lift
ignition
