Ceado E37Z-Barista, Use And Maintenance Manual

Page: 62 / 164

62
GB
WARNINGS AND SUGGESTIONS
Never operate without hopper and lid in
place.
Make sure that shutter is fully open to the
end of its stroke (see Fig. 25).
Do not let the coffee grinder run long without coffee
beans in the hopper; if this were to happen it would
cause tripping of the motor thermal overload
protection. In that case it is necessary to wait until
the overload protection is reset before starting to
grind coffee again.
For this reason, never leave the pack of coffee
beans sitting in the hopper as this prevents you
seeing how many coffee beans are left.
When the coffee grinder is not to be used during the
time when the business is closed, it should always
be switched off with the main switch.
Put only coffee beans in the hopper, not
ready-ground coffee or other
substances.
Fig. 25
ADJUSTING THE FILTER-HOLDER
SUPPORT
The filter-holder support has been designed to work
with the different holders found on the most
widespread coffee machines on the market.
Using a medium size Phillips screwdriver, slacken
the support adjustment screw (1 Fig. 24), position
the filter-holder on the support (2 Fig. 24), adjust its
height and then tighten the screw again.
The optimum adjustment is the one that supports
the filter-holder in a perfectly horizontal position.
Note: If the filter-holder support is used, it is
recommended to work with impulse mode
switched off.
Fig. 24
2
1