CE+T Power TSI VEDA, User Manual

Page: 7 / 41

DSP
T2S
EMI
FILTER
EMI
FILTER
User
Interface
Redundant
Commuication
Bus
L’
N’
-
+
Local Signaling
7 – TSI VEDA – User manual – v7.1
3. TSI TECHNOLOGY
Inverter modules carrying the TSI logo and the REG mark is a traditional converter (DC in, AC out). Sinusoidal output converted
from DC input.
Typical loads
„ „
Resistive load
„ „ Inductive and resistive
„ „
Capacitive and resistive
„ „ Non linear (electronic)
3.1 REG-mode
Inverter modules carrying the TSI logo and the REG mark is a traditional converter (DC in, AC out). Sinusoidal output converted
from DC input.
„ „
DC input only.
„ „ The output voltage is always conditioned, low THD (sinusoidal output)
„ „
The overload capacity is 135% for 15 seconds
„ „ The inverter efficiency is >88%.
The TSI works according to True Redundant Structure (TRS) that features decentralized logic, redundant communication bus and
three levels of, individually independent, disconnection.
Isolation test must not be performed without instructions from the manufacturer.