Varistor
TCB
wood
screws
(4.5x35)
S6
plastic
anchor
TF 6
lobe
screw
(M4x8)
T20
screw-
driver
Screw-
driver
case
Countersunk
Phillips
screw
(M4x35)
Plastic
anchor
Wire
sealing
cap
Fixing plate
for the
remote
controller
Remote
controller
-
-
-
-
-
-
2
2
2
1
SUBLIM
1
3
3
1
1
1
2
2
-
-
EN
13
cdvi.com
cdvigroup.com
SUBLIM
Illuminated Weatherproof Keypad with remote electronics
INSTALLATION MANUAL
3] MOUNTING KIT
4] INSTALLATION
Verify the distance between the SUBLIM
keypad and its remote electronic (refer to
page 3). Place the back plate of the SUBLIM
on the wall and the bracket of the remote
electronic then mark with a pen the hole
location then drill the 2 mounting holes
(6mm drill bit Ø and 35mm hole depth)
and the hole wiring access.
Fasten the PROFIL100EC keypad to the
back plate by using the supplied (M4x8)
Torx
®
screw and Allen spanner hardware.
To fi nalize installation of the product,
insert the screw cap.
Insert the 3 plastic anchors in the holes.
Mount the back plate of the SUBLIM
with the (M4x35) mounting screws.
GALEO
®
GALEO
®
(x2)
5
Insert the 2 plastic anchors in the
holes. Place the bracket of the electronic
and screw on the wall using the supplied
M4x30 screws. Slide the box from up
to down on the bracket.
3
Insert the cable in the hole access area
of the back plate.Then mount the keypad
on the back plate, placing fi rst the top
in the hooks and then the bottom.
GALEO
®
GALEO
®
(x2)
Insert the cable in the remote electronic
and wire the cable to the terminals.
Don’t forget to install the varistor on the lock
(refer to page 4, Notes and Recommen-
dations).
