16
17
EN
EN
IPV
IP Video Door Station
6.1 Connecting to the Door Station
To set-up the door station, a Wi-Fi or Ethernet connection is needed:
1. Wi-Fi connection
Enter in your PC Wi-Fi setting and connect to “
DIGIPCALL
” door station.
By default, the door station emits the Wi-Fi signal (ID = DIGIPCALL
,
Password = digipcall12345
). The default WiFi address is
10.3.141.1,
and
must be entered into a browser.
2. Ethernet connection
Connect the RJ45 cable and power up the door station.
The IP address of the door station automatically appears
on the first line when switching on.
It is important to take note of the IP address, as it only appears on the screen
for 20 seconds.
Then, enter the IP address into a browser.
NB: The @ symbol displayed on the screen indicates that the board is properly
connected to the network. (recommended choice)
The X symbol on the display indicates that the connection to the board
cannot be made via wifi only
6.2 Connecting to the Web Interface
To access the connection page, enter the IP address
in your browser’s search bar.
Default settings:
- Email: cdvi
- Password: cdvi
NB: A website is created as factory default.
The following instructions will allow to modify the website in order to
adapt it to your own site.
Example of adresse given
Example of adresse given
6] SETUP
Language :
Connection to the door station : Site site par défaut
Équipement Platine
d’accueil Portier téléphonique Langue
Language choice see 6.2
