1
2
3
*When installing the reader on a post refer to “recommendations” (P9).
Measure and mark the center lines to determine
the reader position. Drill the mounting screw holes
(Diametre: 4MM for the mounting plate and 6MM
for the reader). Drill the wiring access area.
Insert the brass anchors in the mounting holes, connect
the cable to the terminal block, Then mount the reader
with the DIAX
®
screws Leave an area to access the cable
complete the wiring). Make sure that the varistor is connected
on the lock (refer to page 2 «Recommendations»).
Place the sticker on the designated area
to hide the fixing screws.
After checking that the mounting kit is complete, you can proceed with the final installation
of your reader. Prepare the appropriate tools (Drill, screwdriver, measuring tape, etc)
and follow the mounting instructions
4 ] Mounting Instructions
Ref :
DGLP60WLC*
4
cdvigroup.com
EN
DGLP60WLC
Hands-Free Proximity Card Reader - Wiegand
INSTALLATION MANUAL
