5
cdvigroup.com
EN
DGLP60WLC
Hands-Free Proximity Card Reader - Wiegand
INSTALLATION MANUAL
ON
ON
ON
Dip 3: Buzzer and LED
CDVI mode
-
Standby, the LED and the buzzer
are both OFF.
(When a badge is presented
there is no feedback).
- Waiting for external commands
to activate the LED and the buzzer.
CENTAUR mode
- Standby, the LED and the buzzer
are both OFF.
(When a badge is presented
the LED light on orange for 150ms
and then turns red and the buzzer
is activated during 150ms.
- Waiting for external commands
to activate the LED and the buzzer.
Important : Dip 3 is set as soon as
power is applied.
Dip 4: Pull ups 12V or 5V
Open collector outputs
:
Select the output voltage
according to the installation.
Dip 1 and 2:
Setting wiegand output
There are 3 types
of Wiegand output
:
- Wiegand 26-bit output
- Wiegand 30-bit output
- Wiegand 44-bit output
5] PRODUCT PRESENTATION
The hands free reader should not be installed on a metal surface. Use a separate power supply
for the DGLP60 WLC. Power the hands free reader before powering the controller.
44 Bit
30 Bit
26 Bit
DGLP60WLC
12V
5V
ON
ON
ON
ON
DGLP60 WLC terminal blocks
Outputs
Correspondence
+
12V DC power supply
-
0 V
H
Clock
D0
Data 0
D1
Data 1
B
Buzzer
V
Green light
R
Red light
