CDVI CD97-4ID, User Manual

Page: 10 / 24

-10-
Setting Camera Resolution
Setting Unlock Mode
UNLOCK Indicator:OFF
TALK Indicator:ON
Buzzer
Beep+, Beep
In standby mode, press
KEY_SET button twice.
UNLOCK Indicator:OFF
TALK Indicator:ON
Buzzer
Beep+
Press
KEY_2
button to set the
camera to High resolution.
UNLOCK Indicator:OFF
TALK Indicator:ON
Buzzer
Beep, Beep
Press
KEY_2
button again
to set the camera to Low
resolution.
Press KEY_2
UNLOCK Indicator:ON
TALK Indicator:OFF
Buzzer
Beep+, Beep
In standby mode, press
KEY_SET button three
times .
UNLOCK Indicator:ON
TALK Indicator:OFF
Buzzer
Beep+
Press KEY_1 button to set
the unlock mode to
Normally opened .
UNLOCK Indicator:ON
TALK Indicator:OFF
Buzzer
Beep, Beep
Press KEY_1 button again
to set the unlock mode to
Normally closed .
Press KEY_1
SETUP INSTRUCTIONS
The resolution of the camera can be
changed
at any time
between high or low resolution.
High resolution is
the
default
setting
, to change the setting, please follow the steps
below
:
• If still in programming mode, the calling mode can be changed by pressing KEY2 cyclically.
• The LED_NAME indicator will always flash while in programming mode.
• If there is no operation within 10 seconds, the door station will exit programming mode automatically.
• To exit programming mode, press KEY_SET button four times to exit manually.
There are 2 unlock modes, Normally open and Normally
C
losed .
Normally Open is default
, to change the setting, please follow the steps
below
:
• If still in programming mode, the calling mode can be changed by pressing KEY1 cyclically.
• The LED_NAME indicator will always flash while in programming mode.
• If there is no operation within 10 seconds, the door station will exit programming mode automatically.
• To exit programming mode, press KEY_SET button four times to exit manually.