12
cdvigroup.com
EN
ADH10
ATRIUM - Schlage Integration Module (Control up to 10 Schlage Door Handles)
INSTALLATION MANUAL
EN
ADH10
ATRIUM - Schlage Integration Module (Control up to 10 Schlage Door Handles)
INSTALLATION MANUAL
Installing the box lock
Installing the box lock allows to secure the box from non-authorized access.
If needed install the box lock as shown
in the picture (inside view of the door).
1.
Remove the box door knock-out.
2.
Insert the lock in the hole.
3.
Slide the “U” metal bracket into the lock
groove as shown in the picture to
secure the lock in place.
Alternatively or complementary to the box lock,
the box may be secured by fixing the cover to
its base using screws.
However this should be done only once the
installation of the full 10-Door Handle Controller
system is completed.
1.
Use the 4 screws supplied to secure
the box cover to its base as shown
in the following picture.