Step 7: Connecting all batteries following the wiring diagram shown in next
chapter.
Step 8: Put all batteries inside with the metal plate.
Note:
To install the second branch of batteries, repeat the same procedure on the
right side of battery box.
Step 9: Put metal top cover back to the unit. Close the frontal fixing plate and the
two parts of the front panel and secure it with screws.
Step 10: Then, connect the battery box to the UPS.
Battery Box 48V
Step 1 : Open the package and place the battery box on a horizontal plane.
Step 2: Remove the removable front panel part by pulling it from the lower
extremity
Step 3:
Remove the fixed part of the front panel by removing the 2 screw present.
1-3K Battery pack rack
www.cdpups.com
English