This document is the property of Tecora and can not be duplicated without permission
Ref : EN MU DSM 46 V2
Page 34 of 49
To modify the displayed program, press
“PRG”
. The program modification is similar to the
program setup (in general: “
” and “
” to select,
“OK”
to confirm). When all the fields have
been filled press again
“OK”
to go to the next program (if present) or to a new one. Press “
”
to return to the normal operation.
Note:
It’s not possible to modify the type of an event (it’s not possible to change a “turn on”
event in “turn off”).
Deleting a program
Press
“PRG”
to access to the
“program mode”
.
Select the program to be deleted using the
“OK”
key.
To permanently delete the program press and keep pressed the
“PRG”
key for about 5
seconds: to confirm the successful deletion, the message
“CLEAR”
will be displayed.
Once deleted a program, the next program (if present) or a new one is displayed.
Press
“OK”
to return to the normal operation (in this case the available programs number is
displayed. Press
“OK”
or “
” to exit.
For further and detailed about the programming and use of the Timer, refer to the user
manual included with the Bravo Basic.
