background image

cdi

meters 

CDI Meters, Inc. 

 [email protected]  

866-885-2462  

www.cdimeters.com 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Warranty 

CDI warrants solely to the buyer that the Model 5100 Flowmeter shall be free from 
defects in materials and workmanship, when given normal, proper and intended 
usage, for three years from the date of purchase. During the warranty period, CDI will 
repair or replace (at its option) any defective product at no cost to the buyer. The 
foregoing warranty is in lieu of any other warranty, express or implied, written or oral 
(including any warranty of merchantability or fitness for a particular purpose). CDI’s 
liability arising out of the manufacture, sale or supplying of the flowmeter, whether 
based on warranty, contract, tort or otherwise, shall not exceed the actual purchase 
price paid by the buyer, and in no event shall CDI be liable to anyone for special, 
incidental or consequential damages. 

Summary of Contents for CDI 5100

Page 1: ...the plant floor The meters may when necessary be installed outdoors For best visibility avoid direct sunlight Orienting the Display The meter must be installed with flow in the direction indicated by the flow arrow If doing so will cause the display to be upside down remove the cover of the meter lift out the display rotate both 180 and re install Wiring the Meter Wiring must be in accordance with...

Page 2: ...f the cable is 22 gauge or heavier and the distance is no greater than 200 feet CDI 5100 flowmeters require summing remote displays with Rev 24 or later firmware MILLIAMP OUTPUT The 4 20 milliamp output is optically isolated within the meter and it is provided with a factory installed jumper which allows it to source a milliamp signal powered from the meter The resistance of the loop connected to ...

Page 3: ...wice The pulse output generates a square wave signal sending one pulse for each cubic foot of air that passes through the meter The LED blinks with the pulse output At zero flow it may be on or off The pulse output can be configured as a threshold output and the scaling of both the pulse output and the milliamp output can be changed using the optional configuration cable Using the Display Pressing...

Page 4: ...air or replace at its option any defective product at no cost to the buyer The foregoing warranty is in lieu of any other warranty express or implied written or oral including any warranty of merchantability or fitness for a particular purpose CDI s liability arising out of the manufacture sale or supplying of the flowmeter whether based on warranty contract tort or otherwise shall not exceed the ...

Reviews: