25
Installation
•
Do not install this appliance if it is
damaged in any way. Installing a
damaged appliance may
invalidate the warranty.
•
The water supply tap should be
located in an adjacent cupboard
so that it can be accessed after
installation.
•
Ensure the appliance is level by
adjusting the feet as necessary.
The dishwasher is equipped with
an adjustable rear foot that can
be raised or lowered by means
of an adjustment screw, located
in the centre of the kick plate.
•
Only use the water inlet supplied
with the appliance.
•
If the water pressure is above 10
bar, a pressure relief valve
should be used.
•
After connecting the water
supply, check to ensure there
are no leaks.
•
The water outlet can either be
connected to a water drain or to
a sink outlet spigot. This
connection should be at a
minimum of 50 cm and a
maximum of 110 cm from the
floor. The drain hose should be
no longer than 4m in length to
ensure good performance from
the dishwasher.
•
To prevent syphoning, ensure
