background image

8

Cleaning

IMPORTANT:

•  Always disconnect the appliance from the power supply before 

undertaking any cleaning.

•  You should always allow the warming drawer to cool fully after use 

before undertaking any cleaning. 

• Never use high pressure water or steam cleaners.
•  Do not use: detergents containing soda, acids or chlorides, abrasive 

detergents (in powder or lotion), abrasive sponges (e.g. steel wool) 
or sponges containing residuals of abrasive detergents, descaling 
detergents, dishwasher detergents, oven sprays.

Warming drawer exterior

•  Clean with a damp cloth.  If it is very dirty, add a few drops of dish 

washing detergent to the water.  Dry with a dry cloth.

•  Do not use corrosive or abrasive detergents, as they can create dull 

areas.  If any of these products accidentally comes into contact with 
the warming drawer, immediately clean the appliance with a damp 
cloth.

•  Slight colour differences on the front of the appliance are due to the 

use of different materials, such as glass, plastic and metal.

Front panel

•  Use a mild detergent and a soft window cleaning cloth or a 

microfibre cloth that does not leave fibres on the surface.  Wipe 
horizontally, without pressing.

•  Do not use corrosive products, hard sponges or rough cloths for 

cleaning.  Clean the aluminium surfaces with a dry cloth.

Summary of Contents for vw150

















Reviews: