background image

6

Use

• Place the dishes in the drawer.

• Set the required temperature.

•  Press the power switch, which will light up to confirm the warming 

drawer is switched on.

• Close the drawer gently.

• Switch the appliance off before removing the warmed dishes.

Selecting the Temperature

•    The temperature knob enables a temperature adjustment between 

approx. 40°C and 80°C.

• Turn the temperature knob to the required position.

•  Do not force the temperature knob past the maximum position, to 

prevent damage to the thermostat.

•  The symbols do not indicate absolute temperature values, but 

recommendations for optimum settings for cups and dishes.

Knob Position

Approx Temperature

Usage Information

Approx. 40°C

To prevent hot drinks from cooling too quickly, 
use this temperature setting to warm the cups 
to a temperature that is safe to touch.

Approx. 60°C

To prevent hot food from cooling too quickly, 
use this temperature setting to warm plates or 
serving dishes.  The use of oven gloves or pot 
holders is recommended for this setting.

Max

Approx. 80°C

The thermostat is set to maximum 
temperature.  The use of oven gloves or pot 
holders is necessary for this setting.

Summary of Contents for vw150

















Reviews: