21
Fig. 22
Fig. 23
Inside of oven
The oven should always be cleaned after
use when it has cooled down.
The cavity should be cleaned using a
mild detergent solution and warm water.
Suitable proprietary chemical cleaners
may be used after first consulting with
the manufacturers recommendations and
testing a small sample of the oven cavity.
Abrasive cleaning agents or scouring
pads/cloths should not be used on the
cavity surface.
NOTE:
The manufacturers of this appli-
ance will accept no responsibility for
damage caused by chemical or abrasive
cleaning.
Let the oven cool down and pay spe-
cial attention no to touch the hot heat-
ing elements inside the oven cavity.
Assembling and
dismantling of the side
runner frames
– Fit the side runner frames into the
holes on the side walls inside the oven
(Fig. 22).
– Slide the tray and rack into the runners
(Fig. 23).
The rack must be fitted so that the safe-
ty catch, which stops it sliding out,
faces the inside of the oven.
– To dismantle, operate in reverse order.
Fig. 24
L
F
Oven floor
The oven floor “
F
” (fig. 24)
can be easily removed to
facilitate cleaning.
Remember to replace the
floor correctly afterwards.
Be careful not to confuse
the tray “
L
” with the oven
floor “
F
”.