22
How to install the hob:
Overall dimensions of the hob:
HVN61FR:
Width: 580 mm
Depth: 510 mm
HVN81FR:
Width: 770 mm Depth: 510 mm
Worktop cut-out dimensions:
HVN61FR:
Width: 560 mm
Depth: 490 mm
HVN81FR:
Width: 750 mm Depth: 490 mm
1. Make the required hole in the worktop. Before doing this, you must
check the instructions supplied with any cooker hood to ensure that
you will have the required clearance. The cut-out (Fig.6) shows a
60mm gap from the wall to the cut-out edge. The distance from the
hob, when fitted, to the back wall is 50mm.
If a splashback/worktop upstand is to be fitted, take this into account
when cutting the hole. The minimum distance that the hob should
be positioned away from the rear wall or splashback is 50mm.
2. Fix the foam seal underneath the appliance by following the outline
of the worktop upon which the hob will rest. This ensures an airtight
seal with the worktop. Do not use silicone type sealant.
