9
•
It is possible to adjust the direct power keys if necessary. To do
so, when the hob is switched off, touch the direct power key for
approximately five seconds until the hob beeps and the display
shows the current power level. Then touch the or keys until the
zone display shows the required power level. The hob will beep
after approximately three seconds to confirm the new power level
has been set.
Boost
•
The hob is equipped with a boost function once the zone is
switched on, allowing a higher power level than power level 12 for
an unspecified length of time. To turn on the boost function, touch
the key.
bo
will show on the zone display. When the pan has
reached the temperature required, then select the required power
level by touching any of the power level keys , or .
Please note:
•
The boost function does not switch off automatically. You must set
a power level when boost is no longer required.
Precook
(preheat function for power levels 6-12)
•
Touch and hold the key until the zone display shows 12 and then
touch the key again. The zone display will show PC
for five seconds during which you must set the power level
required, as described above. The hob will beep to confirm the
selection, and the zone display will alternate between the power
level set and PC.
•
To cancel the precook and return to normal cooking, set the power
level required using the power keys , , or .
