19
How to install the hob
Overall dimensions of the hob:
Width: 770 mm Depth: 510 mm
Thickness: 45 mm
Worktop cut-out dimensions:
Width: 750 mm Depth: 490 mm
If a splashback/worktop upstand is to be fitted, take this into account
when cutting the hole. The minimum distance that the hob should be
positioned away from the rear wall or splashback is 50mm.
~ 2 mm
Fig.7
1. Make the required hole in the worktop.
Before doing this, you must check the
instructions supplied with any cooker hood to ensure that you will
have the required clearance. The cut-out (Fig.8) shows a 61mm
gap from the worktop edge, and back wall to the cut-out edge. The
distance from the hob, when fitted, to the back wall is to be 50mm.
Rear Wall
Front edge of worktop
Adjacent vertical surface
(cupboard etc. -
Measurement applicable
to both sides.)
750
490
Min.
Cut-out
61
Min. 60
Min.
60
Fig.8
