10
remaining. In normal use, the timer ending prompts the zone heating
to end as well.
To set the timer
•
First, switch on the hob if necessary and set the zone you’d like
to be timed to the required power level. Next, touch either of the
timer sensors (
or
). This will activate the timer. A decimal
point (LED indicator) should appear next to the timer display.
•
Finally, set the number of minutes on the timer using the timer
or
sensors. A maximum of 99 minutes can be set.
•
Once the time has elapsed the hob will emit an acoustic signal and
the zone will cease operation. To cancel the acoustic signal simply
press any sensor field.
To cancel the timer
•
Simply touch the timed zone’s plus or minus sensor to activate
zone adjustment and then either press the timer plus and minus
sensors simultaneously (
and
) or use the timer minus
sensor to return the number of minutes to ‘0’. The timer will then
be cancelled.
Please note:
Activating the timer with the timer minus sensor
will automatically take you to the 99 minute limit of the timer. This is
useful if you wish to set a large number of minutes (e.g. 90) but you
cannot go back to 0 without cycling down through all of the minutes
or turning the hob off and then on again.
