8
Auto-heat Function
Both zones are equipped with an auto-heat function, which reduces
the warming up time for the zone.
To activate the auto-heat function on a zone
•
Switch the hob on, if not already so, and touch the zone's minus
setting selector (6). Then, touch the zone's plus setting selector (4)
and then set the desired power level using the zone's minus setting
selector (6). A decimal point will appear next to the power level to
confirm that the auto-heat function is active.
To deactivate the auto-heat function
•
Simply touch the desired zone's minus setting selector (6). The
decimal point next to the power level should display to confirm that
the auto-heat function has been deactivated.
Each power level has a limited time for which the auto-heat function
can be used. A table showing these times is shown below.
Please note:
The auto-heat function is not compatible with power
level 9.
1
1
Zone Power Level
Maximum
Operating Time
(minutes)
2
3
4
5
6
7
8
9
2.4 4.4 5.2 6.2
1
2.4
2.4
- -