23
Burners and Grids
•
These parts can be removed and cleaned with appropriate products.
•
After cleaning, the burners and their flame spreaders must be well dried and correctly
replaced.
•
It is very important to check that the burner flame spreader and the cap have been correctly
positioned. Failure to do so can cause serious problems.
•
Check that the electrode “
S
” (figs. 12 - 14) next to each burner is always clean to ensure
trouble-free sparking.
•
Check that the sensor “
T
” (figs. 12 - 14) next to each burner is always clean to ensure correct
operation of the safety valves.
•
Both the sensor and ignition plug must be very carefully cleaned.
•
Note: To avoid damage to the electric ignition do not use it when the burners are not in
place.
Correct Positioning of the Auxiliary, Semi-Rapid and Rapid Burners
It is very important to check that the burner flame spreader “
F
” and the cap “
C
” have been correctly
positioned (see figs. 12 and 13).
Failure to do so can cause serious problems.
Correct Position of the Triple Ring Burner
The triple ring burner must be correctly positioned (see fig. 14); the burner ribs must be fitted in
their housing as shown by the arrow.
The burner correctly positioned must not rotate (fig. 15).
Then position the cap “
A
“ and the ring “
B
“ (figs. 15 - 16)
Summary of Contents for GB RV 701 SS
Page 2: ...2...
Page 24: ...24 S F C T A B T S Fig 13 Fig 12 Fig 16 Fig 15 Fig 14...
Page 47: ...47...