6
Using your extractor
For best performance, you should switch on the extractor 15 minutes
before starting to cook and leave it to run for approximately 15
minutes after the end of cooking (you can use the timer function for
this).
1 - Speed increase button
2 - On/off button
3 - Timer button
4 - Speed decrease button
5 - Light button
To switch on the extractor and set the speed level
- Press button 2 on the remote. The appliance will switch on at speed
level 1.
- To increase the speed level touch button 1. The LED indicator on the
extractor body will change colour with each speed.
- To reduce the speed level touch button 4.
Please note
that you
cannot lower the speed below speed level 2 using the remote. To
return to speed 1 you must switch the extractor off and on again.
- To switch the extractor off, touch button 2.
Intensive function
The extractor is equipped with an intensive function which runs for
1
2
4
5
3
Fig. 1
Summary of Contents for EVX110
Page 22: ...22 NOTES...
