10
| Instruction Manual
Installation
1) Prior to installation, check that all
parts are present and free from transit
damage. In the event of damage
being discovered contact your
supplier and do not proceed with
installation
2) Before making a cut-out in the
kitchen cabinets or worktop,
ensure that there are no structural
(or other) obstructions that would
hinder installation. Ensure that the
cabinet dimensions are sufficient to
accommodate the extractor, allowing
for the specified clearance between
the final installed positions of the
extractor and the hob
3) Make a rectangular cut-out in the
worktop to accommodate the
extractor.
The dimensions of the cut-out should
be:-
EDD62 - 510 x 100mm
EDD92 - 810 x 100mm
90
580/880
328
114
MAX1045
MAX330
255
260
MIN720
261
150
360
Fig.5
We recommend that you seek the help
of another individual when installing
this product. The fixings supplied are
suitable for most installations. It is the
responsibility of the installer to ensure
that the fixings are suitable for the
cabinets in the property.
Fig.7
Fig.6
