background image

2

Important

This appliance is designed and manufactured solely for the cooking of domestic (household) food and is not 

suitable for any non domestic application and therefore should not be used in a commercial environment.

The appliance guarantee will be void if the appliance is used within a non domestic environment i.e. a semi 

commercial, commercial or communal environment.

The CDA Group Ltd cannot be held responsible for injuries or losses caused by incorrect use or installation of 

this product. Please note that CDA reserve the right to invalidate the guarantee supplied with this product 

following incorrect installation or misuse of the appliance.

Appliance Information:

Please enter the details on the appliance rating plate below for reference, to assist CDA Customer Care in the 

event of a fault with your appliance and to register your appliance for guarantee purposes.

Appliance Model

Serial Number

Declaration of CE Conformity

This double oven has been designed, constructed and marketed in compliance with:

• 

Safety requirements of EU Directive “Low Voltage” 2006/95/EC;

• 

Protection requirements of EU Directive “EMC” 2004/108/EC;

• 

Requirements of EU Directive 93/68/EEC;

• 

Requirements of EU Directive 2011/65/EU;

• 

Requirements of EU Directive 2011/65/EU.

Important Information for Correct Disposal of the Product in Accordance with  

EC Directive 2012/19/EC.

At the end of its working life, the product must not be disposed of as urban waste. It 

must be taken to a special local authority differentiated waste collection centre or to 

a dealer providing this service.

Disposing of a household appliance separately avoids possible negative consequences 

for the environment and health deriving from inappropriate disposal and enables 

the constituent materials to be recovered to obtain significant savings in energy and 

resources. As a reminder of the need to dispose of household appliances separately, 

the product is marked with a crossed-out wheeled dustbin.

Summary of Contents for DK1151

































Reviews: