18
Replacing the Halogen Oven Lights
WARNING: Ensure the appliance is switched off before replacing the
lamp to avoid the possibility of electric shock.
•
Allow the oven cavity and the heating elements to cool down.
•
Switch off the electrical supply.
Top Right Lamp:
•
Remove the protective cover
C
(fig. 5);
•
Replace the halogen lamp
B
with a new one suitable for high
temperatures having the following specifications: 230V and same
power (check watt power as stamped in the lamp itself) of the
replaced lamp.
IMPORTANT WARNING: Never replace the bulb with bare hands;
contamination from your fingers can cause premature failure.
Always use a clean cloth or gloves.
•
Refit the protective cover;
Left Lamp:
•
Remove the left wire rack by unscrewing the fixing screws.
Press down from the top the protective cover
A
(fig. 5) and remove it
by rotating on the lower side.
IMPORTANT:
never use screwdrivers
or other utensils to remove the cover
A
. This could damage the
enamel of the oven or the lampholder. Operate only by hands.
•
Replace the halogen lamp
B
with a new one suitable for high
temperatures having the following specifications: 230V and same
power (check watt power as stamped in the lamp itself) of the
replaced lamp.
IMPORTANT WARNING: Never replace the bulb with bare hands;
contamination from your fingers can cause premature failure.
Always use a clean cloth or gloves.
•
Refit the protective cover
A
operating in reverse order.
ATTENTION:
the notch in the inner edge of the cover must be
oriented toward the lamp.
•
Assemble the left wire rack.
Note: Oven bulb replacement is not covered by your guarantee.
A
B
B
C
1
2
A
A
WRONG
CORRECT
Fig. 5
Summary of Contents for DK1151
Page 31: ...31 ...
