background image

Close-up View (control panel)

A

B

C

D

E

F

G

H

I

Cycle indicator light

Low rinse aid indicator light

Cycle select button

Power button

Power indicator light

1/2 load button

NOTICE

Carefully read the instructions contained in this manual, as they

provide important information which is essential to safe and

proper installation, use and maintenance of the appliance.

* During installation, the power supply cord must not be exces-

  sively or dangerously bent or flattened;

* If the appliance is not operating properly or maintenance must

  be performed, disconnect the appliance from the power supply.

- Keep detergents out of the reach of children, who must also be

  kept away from the dishwasher when it is open.

- This appliance cannot be installed outdoors, not even if the

  area in which it is  installed is covered by a roof; it is also very

  dangerous to leave it exposed to the rain and elements.

- Do not touch the heating element during or after a wash cycle.

- Do not lean or sit on the door when it is open, as this could

  overturn the dishwasher.

- If the appliance malfunctions, turn off water supply to the appli-

  ance and disconnect the plug from the wall socket. Then, con-

  sult the section entitled, "Troubleshooting". If you cannot re-

  solve the problem, contact a service centre.

- Only specialised personnel are authorised to make repairs.

- Appliances which are no longer being used must be made inop-

  erable by cutting the power supply cord and removing the door

  lock.

            This appliance complies with following EEC di-

             rectives:

- 73/23/EEC of 19/02/73(Low Voltage) and subsequent modifi

  cations;

- 89/336/EEC of 03/05/89 (Electromagnetic Compatibility) and

  subsequent modifications.

- Carefully dispose of the packing material.

- After removing the packing, check to make sure that the appli-

  ance is not damaged. If  in doubt, contact a qualified professional.

- The dishwasher must only be used by adults for the washing of

  household dishes and cooking utensils.

- Fundamental rules to follow when using the appliance:

* Never touch the dishwasher when barefoot or with wet hands

  or feet;

* We discourage the use of extension cords and multiple sock-

  ets;

Safety Is a Good Habit to Get Into

.1.

CW495

A

B

C

D

E

F

H

G

I

Delay select button

Low salt indicator light

Display delay time and

programme running time

GB

Summary of Contents for CW495
















Reviews: