29
Cleaning the Door Seal
Check regularly that there are no paper clips, buttons, nails or pins
in the folds of the door gasket.
Cleaning the Drain Pump
The drain pump only needs cleaning if the water is not being
pumped out efficiently. This may happen if it has been blocked by
buttons, brooches or similar objects.
In this case, proceed as described below.
Remove the mains plug to disconnect the appliance from the
electricity supply.
•
Use a small screwdriver
as a lever to remove the
plugs shown here, turn
the plinth downwards to
access the pump
•
Extract the drain hose ”A”.
Warning: if the hose is hot, the water is
hot or could be near boiling point.
•
Place a shallow container on the
floor and remove the plug “B” to
drain off the water.
•
Depending on the amount of
water in the appliance, the
container may have to be emptied
several times.
•
When no more water is coming
out, close the hose again by
pushing the plug “B” firmly back
into place.
•
Unscrew the cover of the pump
“D” by turning it to anticlockwise.
