CD-R King DP321, User Manual

Page: 18 / 50

DP321 User's Manual
- 12 -
3. Come out a window of “Add New Hardware Wizard”-“Windows operation”, choose “Not
Search, I want to Choose the Setup Driver (D)”, click “Next”.
4. Come out a window of "Manufacturers/Printers", click "Have Disk...”.
5. Come out a window of “Install From Disk”. Please according to the operating system
environment, you should select the path as follow: CD-ROM-“Driver”-“WIN2000
(XP-Vista-Win7)”, where you can find a file named: DP321.inf, click “Open”, then click “OK”
to return to the window of “Manufacturers/Printers”, click “Next”.
6. Follow the direct click “Next” gradually till the installation is finished.
The installing steps for Windows 98 are as follows
:
（
1
）
The installing steps with a parallel cable or a serial cable:
1. Click “Start” → “Settings” → “Printers”.
2. Click “Add Printer”, then it will show a window of “Add Printer Wizard”, click “Next”, then
please read the select direct carefully, such as, select “Local printer” in the “Local or
Network Printer” window, then click “Next”.
3. Come out a window of “Click the manufacturer and model of your printer”, click “Have
Disk...”, please click “Browse”, select the path as follow: CD-ROM-“Driver”-“WIN98
(WINME)”, where you can find a file named: DP321.inf, click “Open”, then click “OK”.
4. Come out a window of “Install From Disk”, click “OK”, return to a window of “Add Printer”,
then click “Next”.
5. Come out a window of “Printer port”, select “Available ports”, such as, select “LPT1: Printer
Port”, click “Next”, and then show the printer’s name. If the system is not installed by other
printer driver process, the printer is treated as default printer by the application process of
Window98 environment, click “Next”. Otherwise according to prompt, choose the printer is
default: “Yes”, click “Next”, choose “Yes-(recommended)”, click “Finish”. Come out a
window of “Printer test page completed”, click “Yes”.
6. The printer driver process is installed successfully.
（
2
）
The installing steps with an USB cable:
Note: 1. As the system of Windows 98/ME doesn’t have integrated USB driver control,
please install USB driver before using USB interface printing. Then install USB
printer driver.
2. If it has installed the USB driver, please install the USB printer driver directly as
the following steps.
USB driver installing steps:
1. Connect an USB cable and turn on the printer.
2. After the computer find out new hardware and finish searching, come out a window of “Add
New Hardware Wizard”, click “Next”.
3. Come out a window of “Add New Hardware Wizard”-“Windows operation”, choose “Search
the best driver for the device (recommended)”, click “Next”.
4. Come out a window of “Search for new drivers”, check “Specify a location”, click “Browse”,
select the path as follows: CD-ROM-“Driver”-“
【
WIN98 (WINME) \ USBdriver
】
”, then click
“OK”.
5. Return to a window of “Search for new drivers”, click “Next”; Come out a window of “Windows
driver file search for the device”, click “Next”.
6. After the system finishing installing the file automatically, come out a window of “USB print
supported”, click “Finish”.
7. The printer USB driver process is installed successfully.