CCV PAD Q25, Manual

Page: 12 / 20

Safety
notes
Power
• Before you connect the terminal power pack to
an electrical outlet, check that the on/off power
switch on the terminal is off. If the terminal does
not have an on/off switch, check that the power
cable connector is removed from the terminals´s
power port. Or, when connecting the terminal to a
power pack, always connect the plug of the power
pack to an electrical wall outlet first. Then connect
the power cable to the terminals´s power port.
The power pack is rated as follows: Input Voltage
100 - 240 VAC 50/ 60 Hz and output voltage 5V DC,
1.0 A.
• Do not use the adapter in a high moisture enviro-
ment. Never touch the adapter when your hands
or feet are wet.
• Allow adequate ventilation around the adapter.
Avoid locations with restricted airflow.
• Connect the adapter to a proper source. The vol-
tage and grounding requirements are found on
the product case and/ or packaging.
• Your terminal contains sensitive electronic com-
ponents that can be permanently damaged if
exposed to excessive shock or vibration. To mi-
nimize the risk of damage to your terminal avoid
dropping your terminal and operating it in high-
shock and high-vibration environments.
• Never immerse the device in water, throw it into
open fire, or expose it to a high level of moisture.
Wipe off the device using only a slightly moiste-
ned cloth. Do not use cleaning agent.
• For damage arising from the use of unapproved
external products (e.g. unsuited charging adap-
ters, power supply units, storage batteries, ca-
bles, etc.), no liability is assumed.
Disconnecting power
• Disconnecting power during a transaction may
cause transaction data files that are not yet sto-
red in terminal memory to be lost. Never remove
the battery pack from the terminal if it is in the
process of performing a payment or other trans-
action („Please wait…“). If this message appears
for a longer period of time, please contact your
network provider.
Location – Electrical Considerations
• CAUTION: Due to risk of electrical shock or termi-
nal damage, do not use the terminal near water,
including a bathtub, wash bowl, kitchen sink or
laundry tub, in a wet basement, or near a swim-
ming pool. Also, avoid using this product during
electrical storms. Avoid locations near electrical
appliances or other devices that cause excessive
voltage fluctuations or emit electrical noise (for
example, air conditioners, neon signs, high-fre-
qeuncy or magnetic security devices, electric mo-
tors).
• Do not plug the power pack into an outdoor
outlet. It is not waterproof or dustproof. Avoid
operation in very hot, dusty, moistly, acidly or oily
environment.
• Do not expose the device to temperatures above
50°C, which can occur behind glass under direct
sunlight, or to temperatures below 0°C.
• Maintain a sufficient distance to other electrical
devices, such as cancelling machines for security la-
bels (min. 50 cm) since this can lead to malfunctions.