Manual CCV IM30
Rev.07
10 / 25
© CCV GmbH - Diese Unterlage darf ohne unsere Zustimmung nicht vervielfältigt oder weitergegeben werden.
This document must not be copied or distributed without our approval.
The following illustration shows the standard cut-out
with the dimensions W x H (mm): 82.40 +0.10/-0.00 x
120.40 +0.10/-0.00 including positioning of the holes
for mounting the terminal.
5.2
Installation based on the EVA SDM cut-out
The dimensions correspond to those of a standard door
module (SDM) as defined by the European Vending
Association (EVA). In this case, the supplied EVA
mounting frame (CCV part number 03442-55) is used
to mount the terminal.
The M4 bolts should protrude from the back of the
mounting plate so that the mounting frame can be in-
serted.
The illustration on the right shows the terminal rear
view including positioning of the holes for mounting the
terminal.
