18
System Installation
Network Connection
DVR has an Ethernet port in the rear for standard RJ45 cable
connection.
Hard Disk Drive
DVR System supports only SATA (Serial ATA) connection. Hard
drives must be SATA and up to 2 hard drives may be connected.
①
Turn off the power after system shutdown
Open the top casing cover.
Please make sure the hard drive is properly seated in the hard
drive rail
Install SATA cable/power cable properly to the hard drive.
Please double check the connections.
Close the top casing cover.
Attention!
At least one HDD must be installed for DVR’s normal operation.
Power Connection
DVR system requires a 110-220V/ 50~60Hz power input. Please be
sure to connect right power to the rear power port.
System Installation Complete
You have successfully installed the DVR system.