44
The dome supports 8 groups of auto scan. Please check the
following steps to set up a scan.
1)
SCAN NO.: Move the cursor here and press IRIS OPEN to
enter the setup of SCAN Number. Move the joystick to
select a preset number (1
-
8) and press IRIS OPEN to
confirm.
2)
TITLE: Move the cursor here and press IRIS OPEN to enter
the setup of SCAN Title. Check the detailed above in DOME
TITLE settings.
3)
<LEFT LIMIT>: Move the cursor here and press IRIS OPEN
to enter. Move the dome to a defined position as left limit
and press IRIS OPEN to save this left boundary.
4)
<RIGHT LIMIT>: Move the cursor here and press IRIS OPEN
to enter. Move the dome to a defined position as right limit
and press IRIS OPEN to save this right boundary.
5) START
:
Move the cursor here and press IRIS OPEN to start
the current scan.
6) SCAN SPEED: Move the cursor here and press IRIS OPEN to
set up the scan speed ranging 1
-
30.
AUTO CRUISE (SEQUENCE)
