③
MASK COLOR : Determine area color. You can select Gray, Green, Red, Blue, Black, White.
④
TRANSP.: Determine the transparency of selected area as controlling number 0 ~ 3.
⑤
RETURN: Select this to save the PRIVACY menu settings and return to the SPECIAL menu.
5. DIS (Digital Image Stabilizer)
This function mitigates any picture movement due to external factors such as wind.
6. COMM ADJ.(Communication Adjustment) :
This function sets up the camera communication status when controlling the camera
thorugh an external control device.
6-1) When the SPECIAL menu screen is displayed, press the UP and DOWN buttons to adjust "COMM ADJ".
6-2) Set up the mode using the 4 direction buttons.
①
CAM ID : Determines the camera's identification number (between 0 and 25 ).
②
BAUD RATE : You can select 2400/ 4800/ 9600/ 19200/ 38400/ 57600 bps.
③
UART MODE : You can select NONE, EVEN, ODD for parity bits.
④
RET PKT : Determines whether to send a command back to the controller device
When a communication control command is sent to the camera.
⑤
DISP CAM ID : Display camera title on top left of the screen.
7. LANGUAGE : You can select the menu language according to your requirements
Through multi language.
8. RESET : Resets the camera settings to the factory defaults.
9. RETURN : Select this to save the SPECIAL menu settings and return to the SPECIAL menu.
Press the SET button in the EXIT menu to save the current settingd and exit the SET menu
23
CAUTION
The chance of resolution decrease is existed DIS function uses the digital zoom.
DIS doesn't operate when background illumination is too low.
DIS doesn't operate when object pattern is monotonic as like sky or white wall
COMMINICATION SETUP
2. BAUD RATE 9600
1. CAM ID 1
3. UART MODE 8-N-1
4. RET PKT ENABLE
5. DISP CAM ID
E X I T
