INT : Internal Syncronization Type
L/L : Power Syncronization Type, Line - Lock
Press the SET button.
You can select a desired phase from 0 ~ 359 when select "phase".
You can decide a syncronization between luminance and color signal when select the "MODE"
3. MOTION DET.:
If you connect an alarm device to this camera, you can monitor activity
more efficiently, because a signal is generated by the camera whenever motion
is detected.
The motion detection signal is output through the MD OUT port.
3-1) When the special menu screen is displyed, press the UP and Down buttons
to adjust " MOTION DET.".
signal generator.
cameras using the power syncronization function(Line-Lock) without using a syncronization
2.
SYNC : In areas where the supply is at 60Hz, you can syncronize the output phase of multiple
21
CAUTION
When using AC Power at 60Hz frequency, you can use the L/L type syncronization.
When the power is DC 12V, the SYNC. menu is fixed to the " INT " mode
LINE LOCK
Press SET to Return
PHASE 255
MODE OFF
MOTION DET
1. AREA SEL
2.AREA MODE ON
4.YPOS l l 2
5.XPOS l l l
3
6.FILL
→
SET
7. Return
3.SEL POS L - TOP
